Philips

Thrive Technical

Dimensions

Thrive Suspended Technical Cross Section

Modules + Runs

Available in 4, 8 and 12ft modules. Module lengths do not include endcaps.

Different modules can be joined together to create continuous runs of various lengths. The following table shows how to configure typical runs using different modules.

Module Mount Spacing
4ft 4'0"
8ft 8'0"
12ft 12'0"
Run Length 4ft
Module		 8ft
Module		 12ft
Module
4' 1x    
8'   1x  
12'     1x
16'   2x  
20'   1x 1x
24'     2x
28'   2x 1x
32'   1x 2x

Endcaps

Thrive Suspended Technical End Cap Cross Section

Variable / Fixed Position Mounts

Fixed position mounts supplied standard at ends. Variable position mounts supplied standard at joints. Variable position mounts cannot be located on 4ft modules. Optional variable position mounts at ends available upon request (8ft and 12ft modules only).

Thrive Suspended Variable / Fixed Mounts

Mounting + Ceiling Types

Thrive integrates with most common T-bar and non-accessible ceiling types. Mounting is also available for open joist ceilings. See Mounting Options

Power Feeds + Electrical Connections

Luminaires are factory pre-wired with quick-wire connectors. Power cords are available in a range of styles. See Power Feeds + Electrical Connections

Wiring Options

Ledalite offers numerous standard options for wiring, battery packs and switching. Download Wiring Options PDF

Specifications

Housing

6063 T5 extruded aluminum.

Weight

3.0 lb/ft.

Optical System

Constructed of 96% reflective white steel to produce a direct/indirect distribution. High performance version utilizes additional highly specular aluminum reflectors. Louvers are available in white blades and aluminum specular or semi-specular blades. White louver blades are spaced 1.3” apart and are 1.1” deep (34 cells per 4ft section). Standard specular and semi-specular louver blades are spaced 3” apart and are 1” deep (15 cells per 4ft section). Specular VDT and semi-specular VDT louver blades are spaced 1.5” apart and are 1” deep (30 cells per 4ft section). Optional Variable Optics kits provide additional up or downlight where needed.

Endcaps

Aluminum die-cast endcaps, baked powder coat finish for color.

Joints

Self-aligning joining system.

Mounting

Fixed position mounts supplied standard at ends. Variable position mounts supplied standard at joints. Variable position mounts can be located on 8ft or 12ft modules within 12” of joint or end. Aircraft cable gripper is tamper-resistant and provides infinite vertical adjustment capability. Aircraft cable, crimp and cable gripper independently tested to meet stringent safety requirements.

Electrical

Factory pre-wired to section ends with quick-wire connectors.

Ballast

Electronic.

Approvals

Certified to UL and CSA standards.

Finish

High-quality powder coat. Available in Ledalite Standard White (textured matte finish), and a selection of other factory and customer-specified colors. Consult factory for details.

Controls

Available with Response Daylight Integrated Controls. See www.ledalite.com/response for details.

Due to continuing product improvements, Ledalite reserves the right to change specifications without notice.