Configure a product, build a catalog number, get spec sheets and photometry and put together a customized spec package.
|
Sync Technical
Dimensions
Modules + Runs
Available in 4 and 8ft modules. Module lengths do not include endcaps.
Modules can be joined together to create continuous runs of various lengths. The following table shows how to configure typical runs using different modules.
| Module | Mount Spacing |
|---|---|
| 4ft | 4'0" |
| 8ft | 8'0" |
| Run Length | 4ft Module |
8ft Module |
|---|---|---|
| 4' | 1x | |
| 8' | 1x | |
| 12' | 1x | 1x |
| 16' | 2x | |
| 20' | 1x | 2x |
| 24' | 3x | |
| 28' | 1x | 3x |
| 32' | 4x |
Endcaps
Sync offers die-cast endcaps as standard.
Mounting + Ceiling Types
Sync integrates with most common T-bar and non-accessible ceiling types. Mounting is also available for open joist ceilings. See Mounting Options
Power Feeds + Electrical Connections
Luminaires are factory pre-wired with quick-wire connectors. Power cords are available in a range of styles. See Power Feeds + Electrical Connections
Wiring Options
Ledalite offers numerous standard options for wiring, battery packs and switching. Download Wiring Options PDF
Specifications
Housing
Die-formed 18 gauge cold-rolled steel.
Optical System
High efficiency optical system providing an optimal direct/indirect distribution. Lower optics consist of a flat acrylic panel with a layer of MesoOptics® film that provides a controlled distribution in the lower hemisphere.
T5/T5HO upper optics include high performance Miro IV® specular reflectors that provide a wide-spread batwing to evenly illuminate the ceiling (T8 upper optics are painted high reflective white).
Standard distribution is 70% up / 30% down. Optional field-installable variable optics kits provide additional downlight as required.
Endcaps
Die-cast endcaps.
Joints
Self-aligning joining system with hands-free pre-joining wire access.
Mounting
Aircraft cable gripper is tamper-resistant and provides infinite vertical adjustment capability. Aircraft cable, crimp and cable gripper independently tested to meet stringent safety requirements.
Electrical
Factory pre-wired to section ends with quick-wire connectors.
Ballast
Electronic. All Ledalite fixtures are supplied with preinstalled ballast disconnects as per changes to the National Electrical Code 410.73(G) and Canadian Electrical Code 30-308(4).
Weight
3.5 lbs/ft
Approvals
Certified to UL & CSA standards.
Finish
High-quality powder coat. Available in Ledalite Standard White (textured matte finish), and a selection of other factory and customer-specified colors. Consult factory for details.
Controls
Available with Response® Daylight Integrated Controls. See www.ledalite.com/response for details.
