Configure a product, build a catalog number, get spec sheets and photometry and put together a customized spec package.
|
Shine™
- Recessed
Project Documentation Generator
Top Downloads
Shine Technical
Dimensions
1'x4'
2'x2'
2'x4'
20"x2'
20"x4'
Maintenance Made Easy
Shine is quick and easy to install and maintain. You can access both the lamp and ballast from below the ceiling without tools.
 |
 |
 |
|
Push lens upwards. |
Slide lens to the opposite side.
|
Replace lamp and slide lens back into place. |
Mounting
Ceiling Integration
Shine integrates with most common T-bar ceiling types. The 2'x2' and 2'x4' sizes have an additional option to integrate with Slot T-Grid and some tegular tile ceiling types.
T-bar Heights
Integrated mounting tabs can be field-adjusted to various T-bar ceiling heights for fastening directly to the T-bar grid and/or tied off to the building structure.
Note: the 1'x4' size is not compatible with 1-11/16" T-bar heights.
Note: the 1'x4' size is not compatible with 1-11/16" T-bar heights.
Drywall kits
Optional drywall kits are available in all sizes for mounting fixtures in standalone or continuous row configurations. Order separately, one kit per fixture.
Air Return
Air return versions are available in the 2'x2' and 2'x4' sizes. Side rails are finished in black. For the 20"x4' size, perforated filler plates are finished in standard white and are ordered separately.
Wiring Options
Ledalite offers numerous standard options for wiring, battery packs and switching. Download Wiring Options PDF
The Shine housing has multiple wire entrances (top or side) to facilitate different installation requirements. Continuous row housing includes knock outs for easy mounting end-to-end. Some sizes/lamping combinations are available with master/satellite wiring to reduce the total number of ballasts required.
Some sizes/lamping combinations are available with master/satellite wiring to reduce the total number of ballasts required.
Specifications
Housing Construction
Die formed, post painted, 22 gauge cold rolled steel (New York City version is 20 gauge). Wire entrances are positioned on the side of the housing to allow easy wiring access for the installer. Multiple wire entrances are available on top or side to allow continuous row mounting of fixtures. Routine lamp and ballast maintenance can be performed from below the ceiling without tools. No hardware is visible.
Finish
High quality, post painted powder coat, high gloss white.
Ballast
Electronic ballasts supplied with pre-installed ballast disconnects as per national electric codes.
Mounting
Compatible with most 9/16" and 15/16" standard flat and slot T-grid ceiling systems. Fixtures in a slot T-grid system will be slightly regressed above the T-bar. Integrated tabs are provided for different T-grid heights. Optional drywall kit is available for non-accessible ceilings.
Weight
2’x2’ – Maximum 23 lbs.
2’x4’ – Maximum 40 lbs.
1’x4’ – Maximum 30 lbs.
Air Return
Optional air return side rails (finished in black) are available in 2'x2' and 2'x4' sizes. For 20"x4' products, optional perforated air return panels (finished in white) are ordered separately and field installed.
Wiring
Fixtures are factory pre-wired and tested for all circuits and emergency battery packs; all leads pulled to a side access with cover plate. Optional armored cable flex-whips are supplied in 6' lengths. Armored cable flex-connectors are supplied in 9' lengths for master/satellite configurations.
Approvals
Certified to UL & CSA Standards. City of Chicago Approved CCEA (Housing Option C). NYC code requirements (Housing Option N). Options C and N not available for all configurations.
Controls
Available with Airwave wireless controls and/or Response integrated daylight harvesting sensors.
Due to continuing product improvements, Ledalite reserves the right to change specifications without notice.
