Housing Construction

Housing - Die-formed, post-painted, 22 gauge cold-rolled steel. Wire entrance is positioned on the top of the housing to allow easy wiring access for installation.

Optical System

The optical frame assembly consists of flat acrylic panels with a layer of protected MesoOptics® film that provides high-angle glare control and high efficiency. The panels are secured to a perforated center shield using a linear prismatic acrylic diffuser. The optical frame ends are constructed from die-formed cold-rolled steel assembled together with extruded aluminum profiles in a sturdy frame. The frame is hinged to allow easy access to the inside of the fixture. Maintenance can be performed from below the ceiling without the need of tools. No hardware is visible.

Finish

Housing and Frame: Post-painted, high-quality powder coat, available in titanium silver and white only.

Ballast

Ballasts are electronic and available in 120V, 277V or 347V. Supplied with pre-installed ballast disconnects as per National Electric Code.

Mounting

Fixture is compatible with most concrete and drywall ceiling types.

Weight

2’x2’ – Maximum 32 lbs.
2’x4’ – Maximum 42 lbs.
1’x4’ – Maximum 35 lbs.

Wiring

Flex whips are supplied in 4' length.

Approvals

Certified to UL & CSA Standards.

Controls

Available with Airwave™ wireless controls and/or Response integrated daylight harvesting sensors.

Due to continuing product improvements, Ledalite reserves the right to change specifications without notice.