Configure a product, build a catalog number, get spec sheets and photometry and put together a customized spec package.
|
Project Documentation Generator
Top Downloads
Minuet Technical
Dimensions
Modules + Runs
Available in 4, 8 and 12ft modules. Module lengths do not include endcaps.
Different modules can be joined together to create continuous runs of various lengths. The following table shows how to configure typical runs using different modules.
| Module | Mount Spacing |
|---|---|
| 4ft | 4'2" |
| 8ft | 8'2" |
| 12ft | 12'2" |
| Run Length | 4ft Module |
8ft Module |
12ft Module |
|---|---|---|---|
| 4' | 1x | ||
| 8' | 1x | ||
| 12' | 1x | ||
| 16' | 2x | ||
| 20' | 1x | 1x | |
| 24' | 2x | ||
| 28' | 2x | 1x | |
| 32' | 1x | 2x |
Endcaps
Mounting
Flush wall mount system can be positioned anywhere along the fixture length. Mounts are adjustable to accommodate variances in wall straightness. See Mounting Options
QuickLock Joining
Ledalite's QuickLock joining system provides simple installation and results in seamless hairline joints.
Integrated Leveling
Contractors can level fixtures quickly and easily with the integrated slide adjustor located at all ends and joints.
Electrical Connections
Luminaires are factory pre-wired with quick-wire plugs for easy installation. See Power Feeds + Electrical Connections
Wiring Options
Ledalite offers numerous standard options for wiring, battery packs and switching. Download Wiring Options PDF
Specifications
Housing
6063 T5 extruded aluminum.
Weight
3.25 lb/ft
Optical System
Indirect: Constructed of highly specular aluminum and a highly reflective 24 gauage metal to produce an Indirect Asymmetric distribution.
Semi-Indirect: Constructed of highly-specular aluminum, white pre-painted metal and a concave perforated optical filter to produce a Semi-Indirect Asymmetric distribution
Direct/Indirect: Constructed of highly-specular aluminum to produce a Direct/Indirect Asymmetric distribution. Aluminum parabolic louver shall have 29 cells per 4ft. Louvers are 1-1/8” deep and 1-1/2” on center. Variable Optics kits provide the ability to add additional downlight where needed.
Endcaps
Molded high-impact polymer or mitered aluminum extrusion endcaps or end-coves.
Joints & Intersections
All joints shall be accomplished using Ledalite’s QuickLock joining system. Optional intersections in L, T or X configurations shall be mitered aluminum extrusion.
Mounting
Brackets attach to existing structure anywhere behind fixture. Fully adjustable mounting brackets to provide up to 1/8” wall variance and allow for vertical fixture leveling.
Electrical
All luminaires shall be factory pre-wired to section ends with quick-connect plugs.
Ballast
Electronic.
Approvals
Certified to UL & CSA standards.
Finish
High-quality powder coat, factory applied to meet AAMA 2603-98. Available in Ledalite Standard White (textured matte finish), a selection of optional factory colors (see factory color chart), or customer-specified colors. Consult factory for details.
Due to continuing product improvements, Ledalite reserves the right to change specifications without notice.
