Mounting Options

Aircraft Cable Mounts

A1 - Non-accessible Ceiling (e.g. concrete, gypsum board etc…)

  • Meets UBC, OSHPD and DSA seismic requirements
  • Canopy: Diameter of 5 1/4" x 3/4"(power)
  • Cable: 7x7 stranded aircraft cable
  • Mountable on 0° - 15° sloped ceiling
  • Optional Chicago Plenum approved version available (A4)
  • J-Box: 4" octogonal box (supplied by others)
  • Fully vertically adjustable at fixture

A2 - T-bar Ceiling

  • Meets UBC, OSHPD and DSA seismic requirements
  • Canopy: Diameter of 3" x 7/32" (power)
  • Cable: 7x7 stranded aircraft cable
  • Tile cut-out hole: Diameter of 2 1/2" (power) or 3/4" (non-power)
  • J-Box: Integral J-Box supplied
  • 1/4 - 20 all thread rod (supplied by others)
  • Fully vertically adjustable at fixture

A3 - Support or Open Joist Ceiling

  • Meets UBC, OSHPD and DSA seismic requirements
  • Canopy: Diameter of 5 1/4" x 3/4" (power)
  • Cable: 7x7 stranded aircraft cable
  • Versatile mount, fully adjustable to accomodate open sloped ceilings
  • J-Box: 4" octogonal box (supplied by others)
  • Fully vertically adjustable at fixture

A5 - T-bar Ceiling

  • Meets UBC, OSHPD and DSA seismic requirements
  • Canopy: Diameter of 3" x 7/32"
  • Cable: 7x7 stranded aircraft cable
  • Tile cut-out hole: Diameter of 2 1/4"
  • Aligned by T-bar and secured to structure
  • J-Box 4" square (supplied by others)
  • Fully vertically adjustable at fixture

Note: Supports 15/16" , 9/16" and slot grid ceiling types

A6 - T-bar Ceiling

  • 65 lbs maximum load
  • Canopy: Diameter of 3 3/4" X 7/32"
  • Cable: 7x7 stranded aircraft cable
  • Supported by T-bar and secured to structure
  • J-Box: 4" square (supplied by others)
  • Fully adjustable vertically at fixture

Please note: standard A6 mount is currently not available for tegular tile ceilings, however certain tegular tile / T-bar combinations may be supported by the use of the A6-3 mount. For more information, please consult factory.